Installation
EV Charger Permit in Texas: 2026 City Rules and Fees
Installation
How we research. We do not run a charger lab. Each guide is built from manufacturer datasheets, official utility, city and state pages, hands-on reviews from outlets that do test, and long-running owner threads — all linked in the sources list. We may earn a commission if you buy through links on this page. See our affiliate disclosure.
Whether you need an EV charger permit in Texas depends less on state law than on your city. The state licenses electricians and sets the code. Cities issue permits and send inspectors. That split leads to one of the most misread rules in Texas home charging: the homeowner exemption.
Below are the state rules, real fees for Houston and Dallas, and a checklist for your electrician.
Most Texas cities require an electrical permit and inspection for a Level 2 charger circuit. Houston charges $100.71 plus a $33.56 admin fee, and only registered master electricians can pull the permit. Texas adopted the 2026 electrical code on September 1, 2026, which adds GFCI rules for outdoor chargers.
The biggest change is the code. TDLR adopted the 2026 National Electrical Code for the whole state. It took effect September 1, 2026. Before that, Texas used the 2023 code.
For chargers, one rule matters most. Charge Pro Texas says the 2026 code raised the outdoor GFCI rule, NEC 210.8(F), from 50 amps to 60 amps. A hardwired charger mounted outdoors on a 60 amp circuit now needs GFCI protection. Inspectors check this on permits applied for on or after September 1, 2026.
Plug-in chargers on a NEMA 14-50 outlet still need GFCI protection everywhere. A hardwired charger inside an enclosed garage still does not.
The state does not issue these permits. Cities do. A Level 2 charger needs its own 240 volt circuit. Almost every Texas city wants a permit for a new circuit.
Malco Electric, an Austin firm, puts it simply. In Austin, panel upgrades, new circuits and charger installs all need a permit from Development Services. A plain swap of an old outlet or switch usually does not.
Outside city limits, there may be no permit office at all. The state code and license rules still apply.
Under Texas Occupations Code 1305.003(a)(6), you do not need a state license to do wiring on a home you own and live in. Texas EV Electricians notes two cautions:
TDLR’s page adds the part people miss. City or regional rules may override this, under Section 1305.201.
So the real question is what your city allows. In Houston, only registered master electricians get these permits. In Dallas, an owner can get a homeowner’s permit for some work. For wiring, the City of Dallas wants you to pass an oral or written exam first. You also sign a sworn form that no one else will be paid for any part of the job.
| City | Who pulls the permit | Fee | Notes |
|---|---|---|---|
| Houston | Registered master electricians only | Level 2: $100.71, plus $33.56 admin fee | Inspection required; permit valid 180 days |
| Dallas | Licensed electrician, or homeowner after a city exam | Stand-alone electrical trade permit: $196 | $181 permit fee plus $15 technology fee |
| League City | Standalone electrical permit | Per city schedule | One line diagram, load calculation and equipment specs |
| Austin, San Antonio, others | Licensed electrician | HomeGuide range: $50 to $200 | Inspection often $100 to $200 more |
By our math, a Houston Level 2 permit comes to $134.27 before any plan review fee. The Houston fee schedule lists Level 1 at $94.00 and Level 3 at $107.42.
The Dallas figure comes from a city bulletin on home backup power. It says changes to home wiring need a separate stand-alone permit at $196.
League City posts one of the clearest lists for homes. It asks for three items:
Houston posts a charging station permit guide, form CE1256. Texas EV Electricians says it adds two rules. A new concrete slab needs a separate building permit. The charger’s install manual must stay on site for the inspection.
Some Houston jobs may also face plan review. The city lists plan review as required for this permit. Fees for it can depend on the job’s value.
Some contractors offer to skip the permit to save time. Here is why that is a bad trade.
Rebates may depend on it. Austin Energy’s rebate terms say installs must follow all codes, local laws and permit rules. Keep the permit, the charger model number and the paid invoice together.
Inspectors catch code changes. The outdoor GFCI rule is new. An inspector will flag a missing GFCI breaker early. See our NEMA 14-50 vs hardwired guide for how that affects your choice.
It leaves a record. A permit and final check show future buyers that the job was done right. Skipping a required permit can lead to fines or orders to tear out the work.
TDLR says electrical contractors must show their license number on both sides of their work trucks. The number starts with the letters TECL. You can look up any license number on the TDLR website before you sign.
A licensed contractor must be a Texas master electrician or hire one. Texas EV Electricians notes the firm must also carry liability insurance under 16 TAC Section 73.40.
Ask your electrician to confirm these before work starts:
Then see what all of this adds up to in our Texas EV charger installation cost guide.
Plan on an EV charger permit in Texas if you live inside city limits. In Houston, budget about $134 and hire a registered master electrician. In Dallas, expect $196 for the electrical permit. Outdoor installs need a closer look under the new code, so pick the spot first.
Then confirm local rebates in our Texas EV rebate guide before you buy.
In most Texas cities, yes. A Level 2 charger needs a new 240 volt circuit. Cities want a permit and a check for new circuits. Houston, Dallas, Austin and League City all list permit rules. Outside city limits there may be no permit office, but the state code still applies.
It varies by city. Houston charges $100.71 for a Level 2 charging outlet permit, plus a $33.56 admin fee. Dallas lists a stand-alone electrical trade permit at $196. HomeGuide puts typical permits at $50 to $200, with inspections often $100 to $200 more where cities charge separately.
State law lets you do wiring on a home you own and live in. Cities can override that. Houston gives these permits only to registered master electricians. Dallas wants a city exam and a sworn form from owners who do their own wiring. Check your city before you start.
Texas adopted the 2026 National Electrical Code for the whole state on September 1, 2026. TDLR kept one carve-out for outdoor air conditioners. For EV chargers, the big change is GFCI protection for outdoor hardwired chargers on circuits of 60 amps or less.
Look for a license number starting with TECL on both sides of the work truck. TDLR requires that mark. Then look up the number on the TDLR website. A licensed firm must be a master electrician or hire one, and must carry insurance.
The Off-Peak Brief
Rebate funding changes, new free-nights plans, permit rule updates, and the occasional charger worth a look. One email a month. Unsubscribe anytime.
Signups are not open yet. If you would like a note when the list launches, email hello@evchargerstexas.com.
A one-page worksheet: panel capacity, circuit size, plug-in vs. hardwired, permit questions for your city, and the utility programs to enroll in.
The checklist will be included when the list opens.